CurTec’s hygiene management solutions

Marc Martens Marc Martens Facebook Linkedin

Hygiene management (HACCP) has become an important discipline after it was pioneered in the food industry in the early 1960s. Since then it has increasingly been adopted by the pharmaceutical and specialty chemicals industry to warrant that their products, too, remain free from contamination. CurTec applies the same principle to the manufacture of High Performance Packaging.

Hygiene management has become so important that has its own acronym, HACCP (Hazard Analysis and Critical Control Points). This methodology was pioneered in the food industry in the early 1960s, specifically as a collaborative program between the Pillsbury Food Company, NASA and the US Army Laboratories to ensure astronauts’ foods were safe for space flights.

HACCP is a preventative approach that is based on engineering management and Failure Mode and Effects Analysis (FMEA) to identify all potential critical hygiene failure areas and eliminate them from the production and delivery pipeline.

Since the mid-1990s, HACCP has increasingly been adopted by the pharmaceutical, biotech and fine chemicals industries to ensure that their products, too, remain safe and free from contamination.

The scope of HACCP has broadened from just the production process
to encompass the entire supply chain


The three original HACCP principles defined in the 1960s have now expanded to form the basis for current international standards such as the FAO’s Codex Alimentarius of 2009. This standard defines a complete safety and quality management system based on seven HACCP principles:

  • Conduct a hazard analysis: determine potential safety hazards (biological, chemical, or physical properties that may cause a product to become unsafe) and identifies preventive measures that must be applied to control them
  • Determine critical control points (CCPs): the critical steps at which control can be applied to eliminate hazards or reduce them to acceptable levels
  • Establish critical limits: the permissible values within which hazards must be controlled at each critical point
  • Establish CCP monitoring requirements: ensuring that the process remains under control at each critical point
  • Establish corrective actions: steps to be taken when monitoring indicates a deviation from an established critical limit
  • Establish verification procedures: ensuring the HACCP system remains working as intended
  • Establish documentation protocols: covering all procedures and records appropriate to these principles and their application

This HACCP methodology also lies at the heart of other Standards, such as ISO 22000, ISO 15378 (cGMP) and the Safe Quality Food Institute's SQF 2000 Code.

The role of packaging in HACCP

The scope of HACCP has broadened from just the production process to encompass the entire supply chain, from sourcing ingredients to delivery and storage.  This means packaging becomes a critical element in ensuring correct hygiene management.

Contamination not only leads to financial loss,
but can also pose an irreparable reputational blow to the manufacturer

Operating by  this standard can have both positive and negative results:

  • Substandard packaging can increase HACCP hazards and make control more difficult by allowing – or even introducing – contaminants into the pipeline
  • High quality packaging can help ensure adequate HACCP by eliminating potential risks and maintaining originally defined critical limits throughout the supply chain

CurTec hygiene management solutions

Contamination and quality-loss constantly threaten food (ingredients), pharmaceuticals and specialty chemicals. When packing and shipping, manufacturers must foresee and control all potential risks with even the smallest amount of contamination having potential to cause product impairment.

The penalties for failure are severe. Cleaning a contaminated product without causing irreparable damage is difficult and expensive. Contamination not only leads to financial loss, but can also pose an irreparable reputational blow to the manufacturer. Clean, robust and well-sealed packaging reduces these risks considerably.

Measuring particles on CurTec Packaging

CurTec International contributes to the hygiene management performance of its clients by supplying optically clean packaging that is proof against airborne and moisture-born contamination.

CurTec is an HACCP-certified manufacturer according to Codex Alimentarius and is currently preparing implementation of ISO 22000 and ISO 15378 (cGMP) certification. In addition, CurTec can provide packaging solutions to meet specific HACCP requirements, using special testing equipment to guarantee extreme hygiene to provide clients with the extra levels of assurance needed. For example, CurTec supplies a leading manufacturer of optical fibre coatings with packaging that has been cleaned and sealed to customer specific requirements.

Do you have specific cleanliness requirements? Feel free to discuss them with us. We will perform a packaging scan and advise you on the safest packaging solution.

What is a packaging scan?




More info I agree